DCFAP - Artigo de Conferência em Revista Científica não Indexada

URI permanente para esta coleção:

Navegar

Entradas recentes

A mostrar 1 - 10 de 10
  • ItemAcesso Restrito
    Quality control and productivity of Oak Timber
    2009 - Carvalho, J.; Santos, J.
    Oak timber is valuated for its beauty, good mechanical properties and natural durability and may have multiple uses. An understanding of the factors that affect oak timber quality is essential. It is important to have quality control of physical, mechanical and technological wood characteristics in order to define the better primary processing and end-use. Silviculture may significantly impact wood quality and final stand value. Specific prescriptions will depend on species, site conditions, desired end product and management options. An appropriate silviculture with optimized technological operations allows a well use of wood even with small diameters. Adequate wood classification is required in order to optimize industrial processes and improve product quality. Quality criteria and procedures for round and sawtimber are referenced.
  • ItemAcesso Aberto
    Efeito de duas técnicas de instalação no crescimento inicial de Pinus pinaster Ait. E em alguns parâmetros do solo
    1997 - Carvalho, J.; Duro, M.; Amaral, Sandra
    Avalia-se o efeito de duas técnicas de instalação ou preparação de povoamentos de Pinus pinaster Ait. no crescimento inicial e nos parâmetros físicos e químicos do solo, em dois locais, com 5 e 9 anos. As técnicas são a armação do solo em vala e cômoro precedida de ripagem (mecânica) e a plantação com abertura covas (manual). A instalação mecânica permitiu maiores acréscimos em altura (+33%), diâmetro (+29%) e volume (+123%). Quanto às características do solo, as diferenças mais destacáveis são, na preparação mecânica, uma maior profundidade efectiva do solo, um aumento dos elementos grosseiros nos niveis superiores, uma densidade aparente e compacidade mais baixas e, uma redução inicial da matéria orgânica. Quanto aos outros parâmetros (P2O5, K2O, bases de troca, acidez) não se observaram diferenças apreciáveis.
  • ItemAcesso Aberto
    Coastal and dune systems rehabilitation – The case of Quiaios-Mira coastal zone
    2004 - Carvalho, João
    Ecological engineering is an important mean of ecosystem restoration and rehabilitation, by using functional ecosystem forces and helping the reestablishment of natural processes. Here two examples cases are presented, where human disturbances have originated a degraded ecosystem. The use of rehabilitation operations have been done in dune systems of the Quiaios-Mira coastal region of Portugal, and the used techniques are described.
  • ItemAcesso Aberto
    A árvore no espaço urbano
    2009 - Carvalho, João
    Faz-se a indicação das funções das árvores e dos espaços arborizados desempenham no espaço urbano, bem como o seu papel no planeamento urbanístico com integração de elementos naturais capazes de proporcionar melhores condições de habitabilidade. Sublinha-se a importância na atenção de aspectos ligados com a selecção de espécies e técnicas de instalação na criação de espaços arborizados no meio urbano.
  • ItemAcesso Aberto
    PROVENANCES TRIAL OF CEDRUS ATLANTICA MANETTI IN NORTH-EASTERN PORTUGAL
    2007 - Carvalho, J; Loureiro, A; Bariteau, M
    Results from a trial with Atlas cedar (Cedrus atlantica Man.) provenances located in north-eastern Portugal are presented. Survival after plantation and initial height and base diameter are analysed. There are significant differences between provenances on survival and height, but not for diameter. Three Atlas cedar provenances were chosen as having the best performances for future afforestation programmes in north-eastern regions of Portugal with similar ecological conditions to the experimental area (A9111 Tikja, Algeria; Assa 30-92, Morocco; Ijar 135-90, Morocco).
  • ItemAcesso Aberto
    Growth response of Quercus rubra to different establishment and management tTechniques in an Agroforestry System in Northwestern Portugal
    1997 - Carvalho, J.; Marques, P.; Torres, F.
    Le croissance et conduite du chêne rouge (Quercus rubra L.) sont présenté dans un systéme agroforestier au nord-ouest du Portugal avec l'application des divers techniques d'établissement et culture. L'accroissement en hauteur, diamètre et volume, et survie son analysées dans differentes conditions de développement: avec et sans tube-avri, désherbage et fertlisation. L'utilisation des tubes-avri produit un significantif croissance en hauteur (+125%) et volume (+186%), mais pas en diamètre. Problèmes de stabilité se possent avec cette technique. Le désherbage à soulement un effect positive dans le survie. Les arbres qui ont été fertilisé present un significantif accroissement en hauteur (+61%) et diamètre (+55%).
  • ItemAcesso Aberto
    A floresta e as Ciências da Natureza
    2007 - Ferreira, C.; Rodrigues, G.; Zamith, M.; Chaves, M.; Carvalho, O.; Carvalho, J.
    A Floresta e as Ciências da Educação. Um projecto Ciência Viva coordenado pela UTAD (Prof. João PF Carvalho). Publicação realizada no XII Encontro Nacional de Educação em Ciências, onde se faz uma análise da implementação de um projecto na Escola S. Pedro, Vila Real.
  • ItemAcesso Aberto
    Manuseamento da semente de Quercus suber L. para produção de plantas de qualidade
    2005 - Silva, C.; Loureiro, A.; Carvalho, J.
    A utilização de plantas de qualidade é um dos factores mais determinantes no sucesso das novas arborizações, para a qual se consideram diversos parâmetros como a morfologia e a proveniência do material genético. O objectivo deste estudo aplica-se à necessidade, após a conservação da semente, do seu manuseamento adequado para produção de plantas de qualidade.
  • ItemAcesso Restrito
    Response of RockyMountain Juniper Juniperus scopulorum Seeds to Seed Conditioning and Germination Treatments
    2009 - Barbour, J.; Carvalho, J.
    Rocky Mountain juniper (Juniperus scopulorum Sarg.) seeds are difficult to germinate in the laboratory and nursery due tomultiple dormancies. The response of RockyMountain juniper to different seed conditioning and germination treatments were examined. The viability of the original seedlot was increased through seed sizing and weight separation. Following this, 21 germination treatments were tested to determine their effectiveness in promoting germination. Fiftheen new germination treatments were evaluated and compared with the six best germination treatments cited in the literature. Seed sizing did not affect seed viability significantly, but weight separation increased viability about 7 to 10% formediumto heavy weight classes.Tree germination treatments yielded the highest germination ranging from 45 to 55%. A warmstratification period followed by a cold stratification period produced the best germination; increasing thewarmstratification from8 to 12 and 16 weeks improved germination.The best germination treatment was a 3 d water soak, followed by 16 weeks warmstratification and then 13 weeks cold stratification. Reducing the warm stratification period by 4 weeks was the second best germination treatment. The third and fourth best germination treatments were VanHaverbeke and Comer’s 90min peroxide soak and a 6 d 10,000 ppm citric acid soak followed by warm and then cold stratification. e study shows that additional seed sizing and weight separation coupled with germination treatments are required to increase germination for RockyMountain juniper seeds.
  • ItemAcesso Aberto
    O Carvalho-Negral em Portugal e transformação tecnológica da madeira
    2005 - Carvalho, J.; Santos, J.; Reimão, D.
    As boas propriedades físicas, mecânicas e tecnológicas da madeira de carvalhonegral (Quercus pyrenaica Willd.) permitem a sua utilização em aplicações de maior valor como sejam a carpintaria e marcenaria. Avaliações realizadas de forma representativa e consistente permitiram melhor conhecer as propriedades da madeira, definir adequados processos de transformação tecnológica bem como conhecer alguns aspectos silvícolas mais relevantes, permitindo a sua utilização mesmo a partir de menores diâmetros. Faz-se uma descrição da espécie, sua ocorrência e ecologia em Portugal, aspectos silvícolas, características da madeira, operações tecnológicas de transformação e classificação por qualidade.